Energy2 White 16 — Rack Battery Specification

Overview

Energy2 Rack Battery

Engineered to UK Specification
Structural and electrical safety
Rack mount and freestanding installation
Programmatic cell sorting for matched cells
Active balancing technology
Compatibility with all open architecture inverters

Configuration Options

Modules	Usable Energy	Nominal Capacity	Max Cont. Output (Current)	Max Cont. Output (Power)	Max Cont. Input (Current)	Max Cont. Input (Power)
1	16.07kWh	314Ah	150A	7.68kW	150A	7.68kW
2	32.14kWh	628Ah	300A	15.36kW	300A	15.36kW
3	48.21kWh	942Ah	450A	23.04kW	450A	23.04kW
15	241.05kWh	4710Ah	2250A	115.2kW	2250A	115.2kW

Technical Parameters

Feature	Specification
Battery Cells	314Ah Prismatic LiFePO4
BMS	GP-PC200 200A BMS
Active Balancer	4A Bluetooth Active Balancer
Dimensions	884mm (H) x 482.6mm (W) x 241.3mm (D)
Weight	118kg
Nominal Voltage	51.2 VDC
Operating Voltage	44 - 58.4 VDC
Operating Temperature	-20°C to +55°C
Communication	CAN / RS485 / RS232
Lifecycles	6,000+ — see Battery Warranty
Enclosure Protection	IP21 (Indoor Use)
Round-Trip Efficiency	≥95%
Scalability	Maximum 15 modules in parallel (241kWh)
Certification	CE / UN38.3 / IEC 62619
Applications	On Grid / On Grid + Backup / Off Grid
Warranty	5 years, extendable to 20 — see Battery Warranty
Hardware Revision	Recorded against the unit serial number at commissioning

Dimensions

Rack Dimensions Rack CAD Drawing

Care Instructions

Location: The battery installation location must remain a clean, dry and well-ventilated location, free from excessive dust, moisture, salt spray, chemical vapours and water ingress.
Airflow: Adequate airflow around the enclosure must be maintained at all times and the unit must not be covered, obstructed or used to support stored items.
Service: The battery must not be opened, moved, modified or serviced by anyone other than Energy2 Ltd or an Energy2 approved battery energy storage engineer.
End-of-life: Do not dispose of the Battery Module with general waste. Energy2 provides a free take-back service for end-users — see below.

End-of-Life & WEEE Disposal

The Battery Module must not be disposed of with general household or commercial waste at the end of its useful life. The crossed-out wheeled-bin symbol on the product indicates that the item must be returned for environmentally responsible recycling under the Waste Electrical and Electronic Equipment Regulations 2013 and the Waste Batteries and Accumulators Regulations 2009.

Free take-back service. Energy2 offers a free take-back service for end-users of its equipment:

We arrange collection of the waste battery from the end-user at no charge, in accordance with our take-back obligations as a producer of industrial batteries under the Waste Batteries and Accumulators Regulations 2009.
To arrange collection, contact hello@energy2.co.uk or 0800 112 6345 with the original system serial number where known.
Do not attempt to dispose of a lithium battery in general waste, commercial recycling, or by any other informal means. Lithium batteries can present a serious fire and chemical hazard if damaged, short-circuited or disposed of incorrectly.

Safe handling before collection. Whilst awaiting collection, customers should:

Keep the waste battery in a dry, well-ventilated location away from combustible materials and direct sunlight.
Avoid further mechanical impact, deformation, or exposure to water or other liquids.
If the battery shows any sign of damage, leakage, swelling, discolouration, abnormal heat, smoke or odour, contact Energy2 immediately on 0800 112 6345 for urgent guidance and, where necessary, the local fire and rescue service on 999.

Energy2 Ltd is a registered producer of batteries and electrical equipment in the UK. Battery Producer Registration Number: BPRN12745. For the full WEEE & Battery Compliance Statement, see weee_compliance.html.

Rack Upright Rack 3 Modules

All Energy2 documents — including previous versions and the warranty this datasheet refers to — are published at energy2.co.uk/docs.